10 Tips For Improving Effectiveness Of Glufosinate Ammonium Use
1. Glufosinate ammonium is a non-selective herbicide, so when using it, avoid spraying on crop leaves and instead use a targeted
spraying method on the stems and leaves of weeds.
spraying method on the stems and leaves of weeds.
2. The effectiveness of glufosinate ammonium is closely related to temperature and humidity. It works best in high temperature and
low humidity conditions. Therefore, it is recommended to spray the herbicide around 2 pm, and avoid using it before or after rainfall.
After spraying, the weeds will gradually turn yellow and die within 2-3 days, and will completely wither within 7-10 days. If there are
still residual weeds, the herbicide can be applied again.
low humidity conditions. Therefore, it is recommended to spray the herbicide around 2 pm, and avoid using it before or after rainfall.
After spraying, the weeds will gradually turn yellow and die within 2-3 days, and will completely wither within 7-10 days. If there are
still residual weeds, the herbicide can be applied again.
3. Glufosinate ammonium loses its effectiveness when it comes into contact with soil, So it is prohibited to mix the herbicide with
turbid water such as ditch water, in order to avoid affecting its effectiveness. Remember to use clean water.
turbid water such as ditch water, in order to avoid affecting its effectiveness. Remember to use clean water.
4. Glufosinate ammonium primarily acts oncontact, so when spraying, it is important to spray the weeds evenly and make sure
they are wet with the herbicide, in order to ensure full absorption.
they are wet with the herbicide, in order to ensure full absorption.
5. For resistant and old weeds, the use of glufosinate ammonium in combination with other herbicides or additives such as
organosilicon can be more effective. For example, 2,4-D and glyphosate can be added.
organosilicon can be more effective. For example, 2,4-D and glyphosate can be added.
6. Before using glufosinate ammonium, it is recommended to cut the weeds short. This can help the herbicide penetrate better
into the inside of the weeds, and improve its effectiveness.
into the inside of the weeds, and improve its effectiveness.
7. Prior to spraying glufosinate ammonium, it is advisable to apply organic fertilizers or nutrients to enhance the crop's immunity
and resistance, and reduce the possibility of crop damage from the herbicide.
and resistance, and reduce the possibility of crop damage from the herbicide.
8. For stubborn weeds that are difficult to remove, a combination of glufosinate ammonium and manual weeding can be used.
First, spray the weeds with the herbicide, then wait for it to take effect before manually removing the weeds.
9. When using glufosinate ammonium, strictly follow the usage instructions and dosage. Do not increase or decrease the dosage
at will, in order to avoid crop damage or environmental pollution.
First, spray the weeds with the herbicide, then wait for it to take effect before manually removing the weeds.
9. When using glufosinate ammonium, strictly follow the usage instructions and dosage. Do not increase or decrease the dosage
at will, in order to avoid crop damage or environmental pollution.
10. When string and using glufosinate ammonium, safety should be proized Avoid direct contact with fire, high trrmperatures, and
sunlight , Store in a cool, dry place and keep out of reach of children. When using, wear protecive equipment such as gloves, masks,
and protective clothing.

sunlight , Store in a cool, dry place and keep out of reach of children. When using, wear protecive equipment such as gloves, masks,
and protective clothing.

Latest News
Contact Us

Name: Kim Gong
Tel: +86-15150222860 , +86-18015677881
E-mail: [email protected]
Skype: kim.gong
QQ: 326296678
WeChat: +8615150222860
Whatsapp: +8615150222860
Add: No.268, Jingang Road, Zhangjiagang Free Trade Zone, Zhangjiagang City, Jiangsu Province, China